Integrated Automatic Cartoning and PE Shrink Wrapping Line | Cartoning Speed 30–70 Boxes/Min | Shrink Wrapping Speed Up to 25 Boxes/Min
The CE-100A Full Automatic Packing Line combines a cartoning section with a PE-film shrink-wrapping section in one connected equipment layout. This integrated line is intended for boxed-product workflows where carton handling and secondary film wrapping are considered together. The line presents the two functions as separate stations, so their stated speeds, utilities, dimensions, and pack limits can be reviewed in context.
As an integrated cartoner and wrapping arrangement, the integrated line helps organize the discussion from carton preparation through wrapping and outfeed. The system does not turn the individual station ratings into one guaranteed line-output figure. Instead, it provides documented specifications for each section, allowing a production team to relate carton size, finished pack size, PE film format, and available floor space to the equipment described here.
The cartoning station in the CE-100A Full Automatic Packing Line has a stated encasing speed of 30–70 boxes per minute. It is specified for carton material in the 250–450 g/m² range and for box dimensions of 70–250 mm long, 50–120 mm wide, and 20–90 mm high. These values identify the carton range described for this section of the CE-100A Full Automatic Packing Line.
The cartoning section requires 380 V / 50 Hz power and has a motor-power rating of 1.5 kW. Its compressed-air requirement is at least 0.6 MPa, with stated air consumption of 20 m³/h. The station measures 4,500 × 1,350 × 1,900 mm and weighs 1,800 kg. For a CE-100A Full Automatic Packing Line installation, these documented figures provide a practical starting point for utility and layout discussions.
The shrink-wrapping station uses PE shrink film and has a stated highest speed of 25 boxes per minute. It supports a maximum packing size of 320 × 150 × 200 mm (L × W × H). The maximum specified film size is 400 mm wide with a 280 mm outer diameter. These limits describe the wrapping section and should be considered alongside the dimensions of the finished carton pack.
This wrapping section requires 380 V, 50–60 Hz, three-phase power and has a stated total power rating of 9.5 kW. The furnace is 1,200 mm long, with an opening measuring 450 mm wide by 220 mm high. The shrink-wrapping machine has a stated weight of 600 kg. The separate electrical specification is useful when planning the services for a combined cartoning and shrink-wrapping layout.
| Parameter | Specified value |
|---|---|
| Film type | PE shrink film |
| Maximum pack size | 320 × 150 × 200 mm |
| Maximum film size | 400 mm width × 280 mm outer diameter |
| Highest stated speed | 25 boxes/min |
| Power | 380 V / 50–60 Hz / 3 phase; 9.5 kW total |
| Furnace opening | 450 × 220 mm |
The product keeps the cartoning and wrapping data distinct. This distinction matters because the cartoning rate of 30–70 boxes per minute and the highest stated wrapping rate of 25 boxes per minute are ratings for different machine sections. A stated speed is one useful parameter, but carton supply, product transfer, pack dimensions, and film conditions remain part of the working sequence.
This integrated line brings cartoning and PE shrink wrapping into a single product concept for secondary-packaging workflows. First, review the incoming product and carton dimensions against the cartoning range. Next, relate the finished carton pack to the wrapping size and film limits. Finally, consider the handoff between the two stations and the space needed for the stated machine dimensions. This process sequence gives the CE-100A Full Automatic Packing Line a clear, practical framing without assuming a particular upstream feeder or downstream conveyor arrangement.
Carton length, width, height, and board quality can be compared with the cartoning range. The completed carton can then be compared with the stated 320 × 150 × 200 mm wrapping limit and the furnace opening. PE film width and roll diameter can be considered with the stated film limit. The available 380 V supply, frequency, phase arrangement, compressed-air service, and equipment space are also relevant to an installation discussion. In a connected layout, the transfer from cartoning to wrapping deserves the same attention as each machine section. A smooth handoff depends on the actual product, carton, finished pack, and line arrangement. These project details can be shared when discussing how the documented CE-100A Full Automatic Packing Line parameters relate to a proposed packaging workflow.
The CE-100A Full Automatic Packing Line can be considered for boxed products that require cartoning followed by PE-film shrink wrapping within a connected packaging layout. Typical use discussions may include secondary packaging of small boxes, carton-and-film format review, and production layouts that need separate cartoning and wrapping specifications. The available product data does not define an exhaustive list of industries or products, so the relevant application is best considered against the documented carton and pack limits.
To discuss the CE-100A Full Automatic Packing Line, provide the carton dimensions and material, finished pack dimensions, PE film details, available electrical supply, compressed-air availability, and layout information. These details allow the cartoning range, wrapping limits, and station handoff to be considered for the intended product. Specifications are subject to change without prior notice.
See the real-world impact of Echo Machinery. Read how our proven platforms and flexible customization have helped distributors and manufacturers scale their businesses.
EN
